Home    About BSD    Careers    Contact Us   Download SpecLink Evaluation Copy

building intelligence for intelligent building

BPM Services

BSD SpecLink FEATURED MANUFACTURER


Gypsum Wallboard Products for Section 09 2116 -  Gypsum Board Assemblies

American Gypsum has been manufacturing, selling and distributing gypsum wallboard products for more than 50 years. We manufacture a full range of gypsum drywall products for the residential, commercial and factory-built housing segments. "The products you need from those you trust."

 

Our M-BlocŪ Mold and Moisture resistant line of products with AzoTech™ were developed as an improved moisture-resistant wallboard with added mold resistance in both the core and the paper. M-BlocŪ interior gypsum panels consist of a mold- and moisture-resistant core encased in 100% recycled paper, purple on the face side and sturdy liner paper on the back side. Long edges of the panels are tapered, allowing joints to be reinforced and concealed with a joint compound system.



At an independent laboratory, certified in accordance with ISO 17025-2005, M-Bloc panels have been tested to the industry's most rigorous standards achieving the best results possible.

Per ASTM G 21 the panels attained a 0 and ASTM D 3273 scored a perfect 10, thus minimizing the risk of mold and mildew growth. Products manufactured by American Gypsum contain no asbestos. AzoTech™ is a trademark of a Syngenta Group Company.

M-BLOCŪ TYPE X



M-BlocŪ Type X interior gypsum panels treated with AzoTech™ fungicide were developed as an improved moisture-resistant wallboard, with added mold resistance in the core and paper. M-BlocŪ Type X interior gypsum panels consist of a fire, mold- and moisture-resistant core encased in 100 percent recycled paper, purple on the face side and sturdy liner paper on the back side. Additionally the core has been reinforced with fibers, increasing its strength and providing fire resistance ratings when used in tested assemblies.

M-BLOCŪ TYPE C
M-BlocŪ Type C interior gypsum panels treated with AzoTech™ fungicide were developed as an improved mold-resistant wallboard, with additional properties to enhance the core of this type X wallboard to achieve superior performance when used in specific fire-rated assemblies. M-BlocŪ Type C interior gypsum panels consist of a fire- and mold-resistant core encased in 100 percent recycled paper, purple on the face side and sturdy liner paper on the back side. Additionally the core has been reinforced with fibers, increasing its strength and providing fire resistance ratings when used in tested assemblies.

M-BLOCŪ SHAFT LINER



M-BlocŪ Shaft Liner: 1-inch gypsum panels treated with AzoTech™ fungicide consist of a fire-resistant, type X core that is encased in a purple, mold- and moisture-resistant, 100 percent recycled face and back paper. The face paper is folded around the long edges to reinforce and protect the core. The panels feature a double beveled edge for ease of installation, with the ends being square-cut and finished smooth. M-BlocŪ Shaft Liner panels are available: 1 inch thick by 2 feet wide, and in a variety of lengths.

Contact us at:
American Gypsum
3811 Turtle Creek Blvd. #1200
Dallas, TX 75224
Tel: 214-530-5500
Toll Free: 800-545-6302
Fax: 214-530-5634
Email: marketing@americangypsum.com
www.americangypsum.com

Gypsum Wallboard Locations: Albuquerque, NM; Duke, OK; Georgetown, SC; Gypsum, CO

Screencap